franklin
02-08 04:03 PM
Love to take the poll, but it is excluding all but a section of members - you take it for granted that this is an Indian only forum and organization
wallpaper Nintendo Wii 2 Release Date
ksircar
10-13 11:20 AM
:confused:
Dear gurus,
I have one fundamental question.
why EAD renewal can take up to 3 months? (90 days). It just does not make sense. I can understand if it is fresh application OR it has been expired for quite sometime before applying for renewal. If it is fresh app, there might be some security checks, application verificaiton checks etc. But EAD Renewal is very simple. You were approved once, your application does not boast any address changes. All you are requesting is renewal based on pending I-485. No common sense!:eek:
This is very very unacceptable and shows the lazyness of USCIS in adjucating timely. But they are VERY TIMELY in increasing fees....:eek:
I know I am very furious but dont we think we should raise some momentum in allowing special processing for EAD renewal or allowing local offices to issue Renewals for EAD which has been eliminated now????
Sincerely...
There are so many things in life that doesn't make sense, but still we accept all those unacceptable things. Friend, consider yourself lucky if you get your EAD card (with all correct info. on the card) in 90 days.
Dear gurus,
I have one fundamental question.
why EAD renewal can take up to 3 months? (90 days). It just does not make sense. I can understand if it is fresh application OR it has been expired for quite sometime before applying for renewal. If it is fresh app, there might be some security checks, application verificaiton checks etc. But EAD Renewal is very simple. You were approved once, your application does not boast any address changes. All you are requesting is renewal based on pending I-485. No common sense!:eek:
This is very very unacceptable and shows the lazyness of USCIS in adjucating timely. But they are VERY TIMELY in increasing fees....:eek:
I know I am very furious but dont we think we should raise some momentum in allowing special processing for EAD renewal or allowing local offices to issue Renewals for EAD which has been eliminated now????
Sincerely...
There are so many things in life that doesn't make sense, but still we accept all those unacceptable things. Friend, consider yourself lucky if you get your EAD card (with all correct info. on the card) in 90 days.
GCBy3000
05-19 09:35 AM
Yes, keep all you honest opinion within your self until your shackles are removed. We all know the visa status H1B is exploting point for some consulting firms and employers. Knowing this I do not understand what is the need of expressing "my desire NOT to stay with him any longer than I need to"
Keep this desire within your self and keep the GC ball rolling until you get some command. But you have already said so. With my experience, I would say the employers and attorneys have very good relationship which they are supposed to have. With this relationship, they will find all the means to do whatever they desire to do. So be patient and butter your employer and get your job done.
Patience wins in this GC process.
Keep this desire within your self and keep the GC ball rolling until you get some command. But you have already said so. With my experience, I would say the employers and attorneys have very good relationship which they are supposed to have. With this relationship, they will find all the means to do whatever they desire to do. So be patient and butter your employer and get your job done.
Patience wins in this GC process.
2011 wii 2 release date. nintendo
GCBy3000
04-17 10:29 AM
Last time when Bill Clinton signed similar bill, it became effective immediately. So this should also be immediate.
more...
gc_buddy
05-05 09:59 AM
Years before, the back log was at Labor Stage, then when PERM Labor came into existance, the back log was at 485 stage, now with non-concurrent filing I think the I 140 will get backlogged.
http://www.immigration-law.com/
05/05/2008: USCIS May Initiate Rule Making Process in June 2008 for Termination of Concurrent I-140/I-485 Filing Procedure
* As we reported earlier, the USCIS has been considering halting the concurrent filing procedure quite some time. Initially it was planning to commence the procedure to publish this proposed rule in November 2008. However, the latest information reflects that the proposed may be released next month, June 2008 with the two months of comment period through August 2008. People are cautioned that this is just a "proposed" rule stage. After the comment period is over, the agency will still have to go through the final rule making procedure with another cycle of OMB review and publication of the rule. There are nothing to panic about at this time. However, people may be conscious of the upcoming change in the filing procedures for I-140 petition and I-485 application from the current single-tier procedure when the visa number is available to the two-tier procedure. Please stay tuned to this website for this important development of immigration procedure changes.
http://www.immigration-law.com/
05/05/2008: USCIS May Initiate Rule Making Process in June 2008 for Termination of Concurrent I-140/I-485 Filing Procedure
* As we reported earlier, the USCIS has been considering halting the concurrent filing procedure quite some time. Initially it was planning to commence the procedure to publish this proposed rule in November 2008. However, the latest information reflects that the proposed may be released next month, June 2008 with the two months of comment period through August 2008. People are cautioned that this is just a "proposed" rule stage. After the comment period is over, the agency will still have to go through the final rule making procedure with another cycle of OMB review and publication of the rule. There are nothing to panic about at this time. However, people may be conscious of the upcoming change in the filing procedures for I-140 petition and I-485 application from the current single-tier procedure when the visa number is available to the two-tier procedure. Please stay tuned to this website for this important development of immigration procedure changes.
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
more...
pappu
08-29 08:35 AM
how about contributing money to IV? that will help more than stirring up a hornet's nest about boycotts etc.
as far as powerful messages go, what more powerful message can there be than having a bill or two passed that can help us. with the necessary support from its members, I am confident that IV can deliver.
each individual member can help us in any capacity. It is a combination of everybody's effort (and not just IV core team) that enables us to succeed in our mission.
---------
As an individual, please try to spread the word of immigration voice amongst the friends you know. Larger numerical membership strength will be very positive for us when we meet lawmakers and media.
-------------
Please try to post IV posters in your local grocery stores, temples and restaurants. One poster is in 'resources section' and the other one that I posted is in a thread called- ideas to increase publicity of IV. http://immigrationvoice.org/forum/showthread.php?t=694
------------
please contribute and also urge people you know to contribute towards IV. The antiimmigration forces are spending a lot of money to block our efforts and we have to lobby harder to get our provisions through.
--------------
as far as powerful messages go, what more powerful message can there be than having a bill or two passed that can help us. with the necessary support from its members, I am confident that IV can deliver.
each individual member can help us in any capacity. It is a combination of everybody's effort (and not just IV core team) that enables us to succeed in our mission.
---------
As an individual, please try to spread the word of immigration voice amongst the friends you know. Larger numerical membership strength will be very positive for us when we meet lawmakers and media.
-------------
Please try to post IV posters in your local grocery stores, temples and restaurants. One poster is in 'resources section' and the other one that I posted is in a thread called- ideas to increase publicity of IV. http://immigrationvoice.org/forum/showthread.php?t=694
------------
please contribute and also urge people you know to contribute towards IV. The antiimmigration forces are spending a lot of money to block our efforts and we have to lobby harder to get our provisions through.
--------------
2010 wii 2 release date. wii 2
chanduv23
03-27 09:52 AM
My wife is currently on a H1b doing her residency. When she was on h4, she wanted to do research or observership on a voluntary basis so that she can get some good letters and also have her name on papers and journals.
She got into a research position as a "research volunteer" at Emory University in Atlanta and was an unpaid volunteer. After getting into that position she figured out that the department was actually advertising for that position for a "research assistant" position - which is a salaried position but they could not really find people to fill that position and because they found her promising and did not want to lose her, they offered her a research position.
Without her knowledge she was a regular worker and was dumped with regular work like a paid employee (though she was not paid). They stressed her out and not flexible with hours and never allowed her to study for USMLE etc... and were expecting her to continue that way for 3 months she worked and worked. So I interfered and stopped her from going there, and we wrote a strong letter to the Head of Cardiology at Emory, who got pissed off because she was not aware that the position was not being paid and the department did not officially want to acknowledge that they did it. So they called her to the department and "WARNED" her not to have any kind of communication and not to step into the department or talk to anyone for any reason. We got pissed and we strongly requested for a "Research Experience Letter" which they told they will mail us. We never recieved any mail for 3 months and then one day we called heer superior doctor and blasted her on phone and she in turn blasted us saying we must not call her. Then after a few weeks, we emailed the department politely asking for a experience letter and pleaded them and used a lot of sugar coated words with a lot of A** Ki***" and finally we got a decent letter. Then after a few weeks, the department sent her an email asking her if she still wants her name to be on a paper she worked on, she replied she wanted to. Then they responded that it is not possible to have her name as she was never working there and in future there must not be any communication from us.
The reason I wrote all this is : Most of you people seem to be desperate to work around the system for your benefit. As people do it, it becomes a mess.
Ours was a genuine case and see how an organization like Emory can do whatever they want for their advantage.
So it all depends on the kind of people you deal with - if you want to work on h4 just for sake of experience - expect the unexpected.
Most skilled immigrants are capable of doing great work if allowed to do but we are unable to do it , and organizations that break rules (Desi consultants or Microsoft or Emory or anyone for that sake) - will have only one motive - to exploit your skill and get the work done. In case of any issues, they will "scapegoat you" and make themselves look clean. So think twice before get attracted to breaking rules.
She got into a research position as a "research volunteer" at Emory University in Atlanta and was an unpaid volunteer. After getting into that position she figured out that the department was actually advertising for that position for a "research assistant" position - which is a salaried position but they could not really find people to fill that position and because they found her promising and did not want to lose her, they offered her a research position.
Without her knowledge she was a regular worker and was dumped with regular work like a paid employee (though she was not paid). They stressed her out and not flexible with hours and never allowed her to study for USMLE etc... and were expecting her to continue that way for 3 months she worked and worked. So I interfered and stopped her from going there, and we wrote a strong letter to the Head of Cardiology at Emory, who got pissed off because she was not aware that the position was not being paid and the department did not officially want to acknowledge that they did it. So they called her to the department and "WARNED" her not to have any kind of communication and not to step into the department or talk to anyone for any reason. We got pissed and we strongly requested for a "Research Experience Letter" which they told they will mail us. We never recieved any mail for 3 months and then one day we called heer superior doctor and blasted her on phone and she in turn blasted us saying we must not call her. Then after a few weeks, we emailed the department politely asking for a experience letter and pleaded them and used a lot of sugar coated words with a lot of A** Ki***" and finally we got a decent letter. Then after a few weeks, the department sent her an email asking her if she still wants her name to be on a paper she worked on, she replied she wanted to. Then they responded that it is not possible to have her name as she was never working there and in future there must not be any communication from us.
The reason I wrote all this is : Most of you people seem to be desperate to work around the system for your benefit. As people do it, it becomes a mess.
Ours was a genuine case and see how an organization like Emory can do whatever they want for their advantage.
So it all depends on the kind of people you deal with - if you want to work on h4 just for sake of experience - expect the unexpected.
Most skilled immigrants are capable of doing great work if allowed to do but we are unable to do it , and organizations that break rules (Desi consultants or Microsoft or Emory or anyone for that sake) - will have only one motive - to exploit your skill and get the work done. In case of any issues, they will "scapegoat you" and make themselves look clean. So think twice before get attracted to breaking rules.
more...
ebizash
03-31 03:44 PM
I wonder why his/her handle is "webPromo"??? hmm... promoting "something" on the web...:D.
hair punishment 2 release date,
smuggymba
01-17 03:31 PM
My cousin took a offer from a employer in CA few months ago who did her H1 transfer but the condition mentioned in the agreement is that
In the event the employee voluntarily resigns or her employment is terminated for performance or cause prior to 4 years, employee agrees to reimburse the "Employer" for the full amount of legal, administrative and filing fees associated with the sponsorship of the employee's work visas as permitted by law.
The employer won't do premium processing so my cousin paid $1000 on her own but she had to travel outside the country to canada to get a new I-94. The employer's law firm filed the paper work with canada embassy in US to get a canadian visa.
Now my cousin got her GC through her hubby which her employer does not know. She is debating if she needs to inform her manager and company as they might ask her to sign any agreement or give back H1 fees.
The employment laws in CA are different so how can she move (if moves within 4 yrs) to another company without paying anything or a little fee to the employer. I told her that H1-B fees are not too high maybe around $4000.00 so the employer will have to spend lot of money on the lawyer's to go to court to suit her if she left say after 2 years of employment as she feels that the agreement is one sided considering the time line.
Tell the employer that the "cousin" is pregnant and needs 4 months off. If the employer offers short term/pregnancy pay, he will be glad to process the resignation....or tell the employer ur moving to india etc.
In the event the employee voluntarily resigns or her employment is terminated for performance or cause prior to 4 years, employee agrees to reimburse the "Employer" for the full amount of legal, administrative and filing fees associated with the sponsorship of the employee's work visas as permitted by law.
The employer won't do premium processing so my cousin paid $1000 on her own but she had to travel outside the country to canada to get a new I-94. The employer's law firm filed the paper work with canada embassy in US to get a canadian visa.
Now my cousin got her GC through her hubby which her employer does not know. She is debating if she needs to inform her manager and company as they might ask her to sign any agreement or give back H1 fees.
The employment laws in CA are different so how can she move (if moves within 4 yrs) to another company without paying anything or a little fee to the employer. I told her that H1-B fees are not too high maybe around $4000.00 so the employer will have to spend lot of money on the lawyer's to go to court to suit her if she left say after 2 years of employment as she feels that the agreement is one sided considering the time line.
Tell the employer that the "cousin" is pregnant and needs 4 months off. If the employer offers short term/pregnancy pay, he will be glad to process the resignation....or tell the employer ur moving to india etc.
more...
shreekhand
07-25 12:11 PM
Some clarifications needed here !
1.) Data entry is not done by adjudication officers (AO)
2.) Unless an AO is trained in a particular "production line"
(I-485, I-765 etc.) they cannot move them around
3.) Bear in mind AO's have the option to and do work from home too.
4.) The adjudication rate per past service center reports is
around 2 or3 cases per hour for I-485
The assumptions here are all the 50 guys are working only on EB cases no family and other cases, they are not doing any other data entry job like putting 450/ead/ap applications into system, they are not approving any of ead/ap cases. And they are working 8 hours daily. Looking at the general work environment around i bet the productive hrs in 8 hr work day is around 5/6 hrs. So keeping in mind these factors i feel the 80000 is okay number. They certainly need more staff. My 2 cents.
1.) Data entry is not done by adjudication officers (AO)
2.) Unless an AO is trained in a particular "production line"
(I-485, I-765 etc.) they cannot move them around
3.) Bear in mind AO's have the option to and do work from home too.
4.) The adjudication rate per past service center reports is
around 2 or3 cases per hour for I-485
The assumptions here are all the 50 guys are working only on EB cases no family and other cases, they are not doing any other data entry job like putting 450/ead/ap applications into system, they are not approving any of ead/ap cases. And they are working 8 hours daily. Looking at the general work environment around i bet the productive hrs in 8 hr work day is around 5/6 hrs. So keeping in mind these factors i feel the 80000 is okay number. They certainly need more staff. My 2 cents.
hot Nintendo Wii 2 Release Date
smileyslimey
11-30 01:42 PM
Thanks to everyone who responded.
Appreciate your advice.
regards.
Appreciate your advice.
regards.
more...
house Nintendo Wii 2
royus77
07-12 06:58 PM
fellow legal immigrations - this is my first posting on immigrationvoice.
i have been following this site very closely and first of all let me congratulate the IV team - you are all doing a terrific job!
now, i have read a lot of threads where employees say their employers do not give them the I-140 receipt numbers or the approved I-140s. this is sick! this is worse than bonded labor. employers with good ethics do not play such dirty tricks. this just plain sucks :mad:
clearly, there are rules from the uscis itself that you can port your priority date to another firm as long as your labor + 140 have been approved. so NOBODY has the moral right to withhold your 140 or labor approvals. i keep hearing that "140 belongs to the company" .. good.. but what the heck does that mean ? does that mean there are laws that permit PD porting but in a way you cannot really do that coz certain companies are not willing to give u the approved 140s?... is this FAIR ? or is it time to put this as another ACTION ITEM to make it illegal for companies to withold 140 from their employees especially if they want to switch jobs ??? something to chew on...
peace!
You are trying to fight against Business Lobby ...It wont work
i have been following this site very closely and first of all let me congratulate the IV team - you are all doing a terrific job!
now, i have read a lot of threads where employees say their employers do not give them the I-140 receipt numbers or the approved I-140s. this is sick! this is worse than bonded labor. employers with good ethics do not play such dirty tricks. this just plain sucks :mad:
clearly, there are rules from the uscis itself that you can port your priority date to another firm as long as your labor + 140 have been approved. so NOBODY has the moral right to withhold your 140 or labor approvals. i keep hearing that "140 belongs to the company" .. good.. but what the heck does that mean ? does that mean there are laws that permit PD porting but in a way you cannot really do that coz certain companies are not willing to give u the approved 140s?... is this FAIR ? or is it time to put this as another ACTION ITEM to make it illegal for companies to withold 140 from their employees especially if they want to switch jobs ??? something to chew on...
peace!
You are trying to fight against Business Lobby ...It wont work
tattoo The Wii2 release date will
linuxra
01-13 12:53 PM
Hi anybody can have any idea,My employment record and everything is good
no way related to their things will it affect my gc
no way related to their things will it affect my gc
more...
pictures wii 2 release date. wii 2
smisachu
01-02 02:09 AM
See my answers below. Best of Luck!!
My new year begins with another immigration issue..need some urgent advice.
My wife went to the US Consulate in Chennai today for her first time H-1 stamping. She completed her Phd in Biology from the US and has been working for almost a year for a US biotech company. The consular officer has asked her to submit additional information -221(g); mostly about her job and the company. I can't understand it! Most of the information asked has already been submitted to the INS in reponse to a H-1 RFE.
My wife has an Advance Parole document and EAD based on my I-485 application.
Can you suggest options for her?
1. can she forget about the H-1, not respond to the 221(g) and travel back on advance parole and start working on EAD?
Yes she can. She need not respond and can travel back on AP. However consult an attorney on how to withdraw the visa application, so the record is straight.
2. If after submission of 221(g) her visa gets rejected, can she still use the Advance Parole to travel to US and work on her EAD?
Yes. AP and H1 have no relation to each other. She has an approved H1, so she can enter on AP and still work on H1. This is valid if she withdraws her H1 stamping application, if the visa gets rejected-consult an attorney about the use of H1 after rejection.3. Any other options/advice?[/QUOTE]
My new year begins with another immigration issue..need some urgent advice.
My wife went to the US Consulate in Chennai today for her first time H-1 stamping. She completed her Phd in Biology from the US and has been working for almost a year for a US biotech company. The consular officer has asked her to submit additional information -221(g); mostly about her job and the company. I can't understand it! Most of the information asked has already been submitted to the INS in reponse to a H-1 RFE.
My wife has an Advance Parole document and EAD based on my I-485 application.
Can you suggest options for her?
1. can she forget about the H-1, not respond to the 221(g) and travel back on advance parole and start working on EAD?
Yes she can. She need not respond and can travel back on AP. However consult an attorney on how to withdraw the visa application, so the record is straight.
2. If after submission of 221(g) her visa gets rejected, can she still use the Advance Parole to travel to US and work on her EAD?
Yes. AP and H1 have no relation to each other. She has an approved H1, so she can enter on AP and still work on H1. This is valid if she withdraws her H1 stamping application, if the visa gets rejected-consult an attorney about the use of H1 after rejection.3. Any other options/advice?[/QUOTE]
dresses Wii 2 Release Date Images:
gsc999
04-18 09:39 PM
I asked this question few days ago but no one responded. I guess nothing is going on. Why do they waste tax payers money by introducing bills and not acting on them.
Any way, pack your bags or wait for ten years.
--
Patience my lovelies. This may be the calm before the storm, who knows.
Per some news report, a debate has been scheduled on Senate floor to debate a comprehensive immigration reform bill during last two weeks of May'07
Any way, pack your bags or wait for ten years.
--
Patience my lovelies. This may be the calm before the storm, who knows.
Per some news report, a debate has been scheduled on Senate floor to debate a comprehensive immigration reform bill during last two weeks of May'07
more...
makeup Unleashed 2 release date
desi3933
06-11 02:39 PM
I am in my 8 yr. Have a H1-B approved Untill 2008 Dec
Have a EB3 Approved Labor and 140 from Company A.
Now as of today if I move to Company B ...
Question :
Can I get a 3 yr Extension based on Company A (140 Approved )
that is from june 2007 to june 2010
OR
Do I get my H1-B untill 2008 Dec ?
----
When I move to Company B is there anything that I have be aware off as
I am planning to pally Eb2 and move the PD from company A
My PD : EB3 Jun 2004
Thanks Thanks Thanks Thanks
3 year H1 extension from date of application (for example: June 2007 to June 2010).
If you move to Company B, you need to restart GC (i.e. new LC and new 140). One can port PD from old 140 to new I-140, however there is a risk involved if the previous I-140 is revoked or canceled.
--------------------------------------------------------------------
Please verify details with your lawyer/attorney. This is just my opinion and not be taken as legal advice.
Have a EB3 Approved Labor and 140 from Company A.
Now as of today if I move to Company B ...
Question :
Can I get a 3 yr Extension based on Company A (140 Approved )
that is from june 2007 to june 2010
OR
Do I get my H1-B untill 2008 Dec ?
----
When I move to Company B is there anything that I have be aware off as
I am planning to pally Eb2 and move the PD from company A
My PD : EB3 Jun 2004
Thanks Thanks Thanks Thanks
3 year H1 extension from date of application (for example: June 2007 to June 2010).
If you move to Company B, you need to restart GC (i.e. new LC and new 140). One can port PD from old 140 to new I-140, however there is a risk involved if the previous I-140 is revoked or canceled.
--------------------------------------------------------------------
Please verify details with your lawyer/attorney. This is just my opinion and not be taken as legal advice.
girlfriend Nintendo Wii 2 Release Date
msingh
06-12 09:06 AM
Hi,
While in the process of filing for labor certification my company has found 2 suitable citizens who are eligible for the job.
Now what are my options going forward and how does this affect my chances of a successful PERM filing ??
I'm filing in EB3 category right now. Also I need to file for labor before oct since my H1 will expire its original 6 year length next Oct (Oct 2010).
While in the process of filing for labor certification my company has found 2 suitable citizens who are eligible for the job.
Now what are my options going forward and how does this affect my chances of a successful PERM filing ??
I'm filing in EB3 category right now. Also I need to file for labor before oct since my H1 will expire its original 6 year length next Oct (Oct 2010).
hairstyles Wii 2 Release Date Images:
Libra
08-10 03:03 PM
Signed up for 50$ monthly
fittan
03-16 06:27 PM
GCPagla,
Job title doesn't have to be the same. The requirement is "same or similar" job. I am in the IT networking...network admin, system admin, network engineer, system engineer, IT consultant, network consultant are all the same. The key is that the job description is similar...there are no guidelines basically its all common sense. For you to go from programmer analyst to development is perfectly ok.
I've not done AC21 before. But if I do, here's what I'll do...Compare your labor description with the new job requirements. They should be similar. Prepare a AC21 letter that list the common and general requirements and send it to the USCIS. They are no official forms and some people even say that this letter is not necessary. However, I think it is important to cover your behind. Make sure this letter is certified, registered so that if anything happens you can prove that you did inform them and ported your I-140 to the new company.
Fittan
Job title doesn't have to be the same. The requirement is "same or similar" job. I am in the IT networking...network admin, system admin, network engineer, system engineer, IT consultant, network consultant are all the same. The key is that the job description is similar...there are no guidelines basically its all common sense. For you to go from programmer analyst to development is perfectly ok.
I've not done AC21 before. But if I do, here's what I'll do...Compare your labor description with the new job requirements. They should be similar. Prepare a AC21 letter that list the common and general requirements and send it to the USCIS. They are no official forms and some people even say that this letter is not necessary. However, I think it is important to cover your behind. Make sure this letter is certified, registered so that if anything happens you can prove that you did inform them and ported your I-140 to the new company.
Fittan
thescadaman
08-10 03:52 PM
I joined IV in the 3rd week of July 2007 when I was randomly searching for information. I did my first one time contribution right on the day the great news was released on 17th July. I have started my $50 monthly starting August 2007.
I would like to mention, what made me believe that IV Core was doing a great job and that it was worth contributing was that IV Core took a lot of risk(credibility) and posted critical news well before it came on any other website. It was like; they had all the scoop before it hit mainstream lawyers or AILA websites sometimes even before it came on USCIS official website (FAQ 3)!
This shows that IV Core has got a lot stronger and they indeed are in close contact with USCIS and that with the enough funds and enough support they will surely make things happen!
Way to go IV Core!
I would like to mention, what made me believe that IV Core was doing a great job and that it was worth contributing was that IV Core took a lot of risk(credibility) and posted critical news well before it came on any other website. It was like; they had all the scoop before it hit mainstream lawyers or AILA websites sometimes even before it came on USCIS official website (FAQ 3)!
This shows that IV Core has got a lot stronger and they indeed are in close contact with USCIS and that with the enough funds and enough support they will surely make things happen!
Way to go IV Core!
No comments:
Post a Comment